the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Remote control Receiver to 2 x relays


Post ReplyPost New Topic
< Prev Topic Next Topic >
digitalis49 
Member - Posts: 2
Member spacespace
Joined: April 24, 2015
Location: Australia
Posted: April 24, 2015 at 6:46 PM / IP Logged Link to Post Post Reply Quote digitalis49
This is my 1st post to this very informative forum so I ask for your indulgence as I am a total novice to 12 volt wiring.
I have built a trailer dolly powered by a 12 volt DC 600 watt motor through 2 x 5-pin Tyco V23134-A1052-C643 relays (30, 85, 86, 87, and 87a) to control forward and reverse of the motor through 2 momentary switches.
(the electrics were done by a friend who is now unavailable)
I would like to connect a remote control receiver to this setup.
The receiver has 5 wires - 1 x positive, 1 x negative, 1 x fwd, 1 x rev, 1 x antenna.
QUESTION:
How do I connect the remote receiver to this setup?
Hope you can help.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: April 25, 2015 at 6:12 AM / IP Logged Link to Post Post Reply Quote howie ll
Go to this page:- https://www.the12volt.com/doorlocks/page3.asp#4w
and look at the diagram actuators reverse polarity.
Lock and unlock = your forward and reverse
actuators = your motor.
This assumes that the forward and reverse wires on your receiver are (-) NEG.
TEST.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: April 25, 2015 at 6:38 AM / IP Logged Link to Post Post Reply Quote howie ll
If so wire from the output of the switches to relay 85.
I've just done a better diagram for you, note the quenching diodes, 1N4004, they protect your receiver.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: April 25, 2015 at 8:02 AM / IP Logged Link to Post Post Reply Quote howie ll
digitalis49 
Member - Posts: 2
Member spacespace
Joined: April 24, 2015
Location: Australia
Posted: April 26, 2015 at 3:26 AM / IP Logged Link to Post Post Reply Quote digitalis49
Thank you, ever so much, Howie II.
I will follow your instructions and, once completed, will send and update.
Again, thank you - from Melbourne, Australia.
hotwaterwizard 
Silver - Posts: 1,350
Silver spacespace
Joined: December 11, 2003
Location: California, United States
Posted: April 28, 2015 at 8:08 PM / IP Logged Link to Post Post Reply Quote hotwaterwizard
Looks like it will do the job to me.Remote control Receiver to 2 x relays -- posted image.
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer