Converting Turn Signal Into Parking Light

Home / the12volt's Install Bay / Relays / Converting Turn Signal Into Parking Light

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

yamikenbuilt

Member - Posts: 16

Joined: June 19, 2015

Location: Hawaii, United States

Posted: April 06, 2018 at 2:51 AM / IP Logged

Does anyone have a wiring diagram to convert a turn signal light to be a parking light also and vise versa? Trying to make my rear turn signal a parkingight also and my front corner marker to flash with turn signal. Thanks for any help.

Back to Top

yamikenbuilt

Member - Posts: 16

Joined: June 19, 2015

Location: Hawaii, United States

Posted: April 06, 2018 at 2:54 AM / IP Logged

Using relays if possible or a way where you don't have to run a bunch of wires. Thanks.

Back to Top

eguru

Copper - Posts: 340

Joined: February 04, 2018

Location: Quebec, Canada

Posted: April 06, 2018 at 6:40 PM / IP Logged

Try this for the side markers.

https://www.homemade-circuits.com/customizing-car-side-marker-lights-to/

Back to Top

yamikenbuilt

Member - Posts: 16

Joined: June 19, 2015

Location: Hawaii, United States

Posted: April 06, 2018 at 8:49 PM / IP Logged

Thanks!

Back to Top

eguru

Copper - Posts: 340

Joined: February 04, 2018

Location: Quebec, Canada

Posted: April 07, 2018 at 7:52 AM / IP Logged

This is an all solid state design. No relays so no switching spikes getting into your electronics.

Just uses an opto-coupler, a diode, and p-channel MOSFET

Converting Turn Signal Into Parking Light -- posted image.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.