Parking Light Isolation and Output Wires, Viper 5204, 2000 Dodge Dakota

Home / the12volt's Install Bay / Relays / Parking Light Isolation and Output Wires, Viper 5204, 2000 Dodge Dakota

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

karl chaffee

Member - Posts: 1

Joined: September 08, 2020

Location: Washington, United States

Posted: September 08, 2020 at 10:39 PM / IP Logged

Hey guys, 16 year old working on installing my first alarm/remote start. Viper 5204 on a 2000 Dodge Dakota.

H1/4 White/Brown (Parking light isolation wire - Pin 87a of onboard relay.

H1/5 White (Parking light output)

The schematic on this site says I am looking for a Black/Yellow wire behind the light switch.

My question: Do I connect the White/Brown to the Black/Yellow and ignore the white wire? Or is there something else I am missing on how this relay gets connected?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.