Power Mirror Wiring

Home / the12volt's Install Bay / Relays / Power Mirror Wiring

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lambeau40

Member - Posts: 1

Joined: October 08, 2022

Location: Wisconsin, United States

Posted: October 08, 2022 at 10:49 PM / IP Logged

Ok, so I have a custom application where I'm trying to wire up some power mirrors. The mirrors are from an early 80's Camaro and have 4 wires. 2 for up/down and 2 for left/right. The switch I am using is from a Pontiac G8 and only has 2 wires. If I check voltage on 1 of the wires I get 12 volts when I press up or right. And the other has 12 volts when I press down or left. Is there any way to wire this with relays or diodes to make it work with these mirrors? Any help would be greatly appreciated!!!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.