2003 sunfire deck wiring

Hey everyone, i have a 2003 sunfire, the factory wiring harness was cut and i need to put it back together. I found an old post on here with the wiring for this car. Question is does it matter which purple wire i put in which pin location? On this wiring information it has 3 purples.

Any help is GREATLY appreciated!

Connector Part Information

12110088 24-Way F Micro-Pack 100 Series (GRY) Pin Wire Color Circuit No. Function A1 PPL 1807 Class 2 Serial Data A2 PPL 1807 Class 2 Serial Data A3-A7 -- -- Not Used A8 TAN 201 Left Front Speaker Output (+) A9 GRY 118 Left Front Speaker Output (-) A10 LT BLU 115 Right Rear Speaker Output (-) A11 DK BLU 46 Right Rear Speaker Output (+) A12 BLK 350 Ground B1 ORN 340 Battery Positive Voltage B2 -- -- Not Used B3 PNK 314 Radio On Signal B4 GRY 8 Instrument Panel Lamp Supply Voltage - 1 B5 BLK 250 Ground B6 PPL 1672 Gain Control Signal B7 -- -- Not Used B8 BRN 199 Left Rear Speaker Output (+) B9 YEL 116 Left Rear Speaker Output (-) B10 DK GRN 117 Right Front Speaker Output (-) B11 LT GRN 200 Right Front Speaker Output (+) B12 -- -- Not Used

Derek J. Anderson

Methinks those two purples are CAN interfaces for the original factory radio.  I'm guessing they route a factory back up aid through the speakers also on-star if either or both are installed.  Can you still hear the sound of your indicators. If those last three aren't a problem at present, don't worry.  If you're fitting an aftermarket unit you'll have to route an ign or acc line from somewhere (ign Switch?) but don't worry about the purples.

Why cant u take an ignition signal from B3 - PINK?

Because that looks like an antenna remote switch to me, check for 12v+ when acc is on if so you're right.