2001 honda cr v driver door wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2001 honda cr v driver door wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

green cr-v

Member - Posts: 2

Joined: April 27, 2009

Location: California, United States

Posted: April 27, 2009 at 11:29 PM / IP Logged

2001 honda cr-v. what is the wiring code for the driver door wire harness? my power lock switch on driver door no longer makes the other doors lock/unlock.

thank you for your time.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 28, 2009 at 7:44 AM / IP Logged

POWER LOCK|GREEN / WHITE *2 |- |driver door harness

POWER UNLOCK|GREEN/ orange *2 |- |driver door harness

At the switch there is also a BLACK wire that supplies a ground to the lock and unlock wires. These wires rest at 12 volts.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

green cr-v

Member - Posts: 2

Joined: April 27, 2009

Location: California, United States

Posted: May 07, 2009 at 11:35 PM / IP Logged

The driver door still locks/unlocks with the switch, but all the other doors don't. is there a wire that carries the signal to the other doors? & when i press on the rubber conduit in the hinge the switch makes the other doors lock/unlock just fine,

thanks

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 08, 2009 at 8:57 AM / IP Logged

I've seen on the CR-V's that the wires inbetween the door and the vehicle get broken or partially severed. You have to go into the door boot and find and repair the broken wire(s)

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 honda cr v driver door wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.