the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

accord 2009 remote start /alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
accord09 
Member - Posts: 3
Member spacespace
Joined: May 02, 2009
Location: Massachusetts, United States
Posted: May 02, 2009 at 9:58 PM / IP Logged  

I have a problem to find the Lock/Unlock wire on the master switch on the driver door. My remote start/alarm unit is CM5000 of Compustar and Lock/Unlock is (-) pulse. I connected RS Lock wire to " orange" on the driver door switch connector and RS Unlock wire to " Brown" wire on the driver door switch connector and remote Lock/Unlock not thing happen? Do some body know which wires are Lock/Unlock on Accord 09? Please help.

iteetwo 
Member - Posts: 27
Member spacespace
Joined: December 31, 2005
Location: United States
Posted: May 03, 2009 at 7:27 AM / IP Logged  
 2009 Honda Accord Last Update:  2/12/2009     
 
 Circuit  Wire Color  Location  
  Constant 12 volts WHITE IGNITION SWITCH OR TOP FUSE BOX @ *
  Ignition 12 volts BLUE IGNITION SWITCH OR TOP FUSE BOX @ *
  Starter YELLOW IGNITION SWITCH OR TOP FUSE BOX @ *
  Dome Light DR PIN PINK,TRUNK / HATCH WHITE BOTH ARE (-) BOTTOM **
  Trunk Pin WHITE (-)16 PIN L GRN CONN DRIVER FUSE BOX PIN 5
  Parking Lamp RED (+) 16 PIN L GRN CONN DRIVER FUSE BOX PIN 11
  Lock ORANGE IN THE DRIVERS DOOR #201
  Unlock BROWN *** IN THE DR DOOR W DOUBLE PULSE
 
#201- See Negative Pulse Door Lock Diagram. * GREEN PLUG ** OF FUSE BOX WHITE PLUG *** From Installer- Unlock Requires BROWN And WHITE To Be Diode Isolated And Double Pulse For Unlock. Wires Found At Door Motor DOOR LOCKS Can Be Done With A Module Call For Details.
accord09 
Member - Posts: 3
Member spacespace
Joined: May 02, 2009
Location: Massachusetts, United States
Posted: May 03, 2009 at 10:20 AM / IP Logged  

Do you mean that I need a module for door lock even I have remote/alarm combo could send out double pulse for Lock/Unlock? Back to the color code, I did connected the L brown and white wires located on White conn behind the Key driver switch to my R/S Unlock wire but nothing happen with single and double pulse. For the Lock wire on the forum wire diagram is "Orange" so I did conected that wire to my R/S Lock wire and still nothing happen too. You said " Wires Found At Door Motor DOOR LOCKS Can Be Done With A Module Call For Details." which No. I could contact you ? Thanks very much.

iteetwo 
Member - Posts: 27
Member spacespace
Joined: December 31, 2005
Location: United States
Posted: May 04, 2009 at 10:05 AM / IP Logged  
the dlpk from bypasskit.com will work for door locks,factory arm,disarm and defrost if i remember when i did the car

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer