wiring diagram for '91 dodge stealth

looking for the wiring diagram for a '91 dodge stealth. installing an alarm with remote starter, along with keyless entry. thanks in advance

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|black or white      |+  |ignition harness            ||          STARTER|BLACK / YELLOW        |+  |ignition harness            ||         IGNITION|BLACK/ white         |+  |ignition harness            ||  SECOND IGNITION|blue/black          |+  |ignition harness            ||        ACCESSORY|blue                |+  |ignition harness            ||       POWER LOCK|brn/blu or brn/wht  |-  |high on firewall by DKP     ||     POWER UNLOCK|brown or brn/blu    |-  |high on firewall by DKP     || PARKING LIGHTS +|GREEN / WHITE         |   |white molex left kick       || PARKING LIGHTS -|green or grn/blk    |   |left of column              ||       HEADLIGHTS|RED / yellow *2       |-  |left of column              ||     DOOR TRIGGER|RED / GREEN/ sil dots |-  |left of column              ||  TRUNK/HATCH PIN|RED / green *1        |-  |sw. or light in trunk       ||         HOOD PIN|blue/black          |-  |ETACS mod. under dash *5    ||  FCTRY ALARM ARM|arms with lock      |   |                            ||FCTRY ALRM DISARM|lt. green *3        |-  |ETACS mod. under dash *5    ||       TACHOMETER|white               |   |instrument cluster *4       ||      SPEED SENSE|yellow/white        |   |instrument cluster *4       ||       BRAKE WIRE|green               |+  |at switch                   ||     HORN TRIGGER|GREEN/ black         |-  |steering column             ||           WIPERS|blu/org, blu/blk    |+  |steering column             ||  LF WINDOW UP/DN|grn/red - grn/blk   |A  |in drivers door             ||  RF WINDOW UP/DN|brn/yel - grn/yel   |A  |in drivers door or dkp      |

Notes:

*1 Also blue/white at ETACS if car has anti-theft.  *2 Must power the negative park light wire to get the headlights to work. For pop-up, interrupt blue/red wire at pop-up switch and connect switch side to blue / YELLOW at pop-up switch to raise lights.  *3 Must be relay isolated from the door key cylinder.  *4 Also found at ECM behind center console. On SOHC models can also use WHITE/ black at the ignition coil for tach.  *5 The ETACS module is located left of the steering column close to the drivers kick. It is flat with its edges facing up, down, front, and back, with its two plugs on the bottom edge.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA