aux wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / aux wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gnarlyskater400

Member - Posts: 3

Joined: September 30, 2006

Location: Pakistan

Posted: July 29, 2009 at 9:03 PM / IP Logged

have recently decided to upgrade my current set-up, and with that i want to do a final perfect wiring job....i want to add a fuse for every remote turn on line that i will need (3 total) and for some led lights.....i have done some research and know i need a relay, and will add a fuse box....so ive drawn up a schematic for the set-up, but i want to know if this diagram would be right for adding a aux fuse box with a relay...adding led switches and led external lights

thanks

aux wiring -- posted image.

Back to Top

Search for other posts by gnarlyskater400

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 30, 2009 at 10:15 AM / IP Logged

Considering all of them are likely to consume less then 1amp, I wouldn't bother with either fuse box or relay.

Back to Top

gnarlyskater400

Member - Posts: 3

Joined: September 30, 2006

Location: Pakistan

Posted: July 30, 2009 at 4:41 PM / IP Logged

ya i know the extra fuse box is overkill....and i prob am gonna get rid of it...but is the wiring of the leds correct both in the switches and the other ones? i really dont wanna fry any of the switches or leds

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: July 30, 2009 at 8:02 PM / IP Logged

If you are using 12 volt LEDs all will be fine. If the LEDs are not 12volt devices, you will need a resistor on each LED.

Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 31, 2009 at 4:53 PM / IP Logged

If they are 2.5 volts, you'll need about 800ohms resistors.

Back to Top

gnarlyskater400

Member - Posts: 3

Joined: September 30, 2006

Location: Pakistan

Posted: July 31, 2009 at 9:00 PM / IP Logged

thanks everyone.....these are 12v leds...already set up to just wire up to a source....thanks again

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

aux wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.