the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1995 explorer with factory alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
fiction1990 
Member - Posts: 2
Member spacespace
Joined: October 21, 2009
Location: California, United States
Posted: October 21, 2009 at 3:24 AM / IP Logged  
I would like to add a remote start to my ford factory alarm. According to the install diagram for the remote start <"Arial" ><"Arial" >

AUXILIARY INPUT (-)

If you wish to use this starter with an aftermarket alarm,

connect the BLUE wire from the 16-pin harness to the

second or third channel (-) output of your existing alarm.

When the output is activated, a (-) signal will be supplied

to the remote starter which will start the vehicle.

Which wire can I use from the factory system? I see on the diagram listed on this site an accessory wire listed but I would assume that is for the windows or something like that. Can that wire still be used and if so how do I activate it? By the way my remote has lock unlock and panic.

ckeeler 
Gold - Posts: 1,461
Gold spacespace
Joined: June 20, 2008
Location: New Mexico, United States
Posted: October 21, 2009 at 9:04 AM / IP Logged  
make and model of alarm? right off the top of my head, you are asking how to trigger your add on remote start using your factory alarm/keyless correct? if so you need to tie the activation wire from the start unit into the lock trigger wire in the driver side kick panel. it is pink / YELLOW and negative triggered, but test it to be sure. change the number of activation pulses on your remote start unit to 2 or 3, then (depending on how many pulses you have iy set to) pressing the lock button 2-3 times in a row within 3-4 seconds will activate the remote start. also, make sure that your unit has a factory alarm disarm output wire, and be sure to hook it up as well. dark GREEN/ purple in the driver side kick panel.
fiction1990 
Member - Posts: 2
Member spacespace
Joined: October 21, 2009
Location: California, United States
Posted: October 22, 2009 at 10:14 PM / IP Logged  

Its a bulldog security rs1100 and that is the info I needed.

Thank You


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer