the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 toyota funcargo/yaris verso


Post ReplyPost New Topic
< Prev Topic Next Topic >
compay 
Member - Posts: 16
Member spacespace
Joined: March 27, 2010
Location: Saint Vincent
Posted: April 08, 2010 at 8:01 AM / IP Logged  
hi looking for wiring diagram for my 2000 toyota funcargo/yaris verso thanks
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: April 08, 2010 at 2:13 PM / IP Logged  
What do you need to know?
compay 
Member - Posts: 16
Member spacespace
Joined: March 27, 2010
Location: Saint Vincent
Posted: April 09, 2010 at 2:54 PM / IP Logged  
am installing a viper 160xv alarm and am getting problems with the door lock interface to unlock and lock the car.
compay 
Member - Posts: 16
Member spacespace
Joined: March 27, 2010
Location: Saint Vincent
Posted: April 09, 2010 at 2:58 PM / IP Logged  
it's a 160vx not xv any help i can get with it would be greatfull
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: April 09, 2010 at 4:10 PM / IP Logged  
Lock/un;lock are low current neg. pulse, either in lock module to right of inst. panel or driver's kick panel.
compay 
Member - Posts: 16
Member spacespace
Joined: March 27, 2010
Location: Saint Vincent
Posted: April 10, 2010 at 7:07 PM / IP Logged  
i found a door lock module but i need to know which wire is for what it have and 8 pin connector to it
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: April 11, 2010 at 2:20 AM / IP Logged  
Dead easy. Take your DMM, set it to ohms, place the black lead to ground, shut other doors and latch the driver's door, place red probe on each wire in turn at the plug, one will lock, one will unlock. This job is faster using a dedicated bulb tester such as the Snap On unit.
This is about a 1 1/2 hour job, I can't hold your hand, you must do some thinking.
compay 
Member - Posts: 16
Member spacespace
Joined: March 27, 2010
Location: Saint Vincent
Posted: April 11, 2010 at 3:03 PM / IP Logged  
did all that already but when i connect the wire from the alarm that should operate it (lock/unlock) the doors nothing happen
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: April 11, 2010 at 4:53 PM / IP Logged  
Look at your wiring. The system is type B
compay 
Member - Posts: 16
Member spacespace
Joined: March 27, 2010
Location: Saint Vincent
Posted: April 12, 2010 at 3:09 PM / IP Logged  
don't understand the term used
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer