the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2016 nissan rogue interlock installation


Post ReplyPost New Topic
< Prev Topic Next Topic >
tserigne 
Member - Posts: 2
Member spacespace
Joined: August 03, 2017
Location: Louisiana, United States
Posted: August 07, 2017 at 4:44 PM / IP Logged Link to Post Post Reply Quote tserigne
Need wiring for interlock device, just starter kill, 12 volt constant, and ignition +
thanks
car nut
wirewise 
Moderator - Posts: 489
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: March 07, 2002
Location: California, United States
Posted: August 07, 2017 at 4:56 PM / IP Logged Link to Post Post Reply Quote wirewise
This is without smart key: https://www.the12volt.com/installbay/downloads.asp?srch=all&term=rogue
If it has smart key, the wiring may or may not be the same. You'll have to check.
~wirewise~ Verify all wiring with your meter before making any connections!
tserigne 
Member - Posts: 2
Member spacespace
Joined: August 03, 2017
Location: Louisiana, United States
Posted: August 07, 2017 at 5:07 PM / IP Logged Link to Post Post Reply Quote tserigne
i need a + starter wire, im thinking under the hood from starter relay. Its common that i have to run wires to starter relay underhood.
car nut
i am an idiot 
Platinum - Posts: 13,666
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: August 07, 2017 at 5:56 PM / IP Logged Link to Post Post Reply Quote i am an idiot
Have you located the starter relay under the hood? Do you have a volt meter?
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: September 02, 2017 at 1:41 AM / IP Logged Link to Post Post Reply Quote howie ll
Why do you need a + starter wire? Polarity doesn't matter to the a starter kill internal relay switch connections providing it's supplied with ignition (+) and ground.
i am an idiot 
Platinum - Posts: 13,666
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: September 04, 2017 at 1:11 PM / IP Logged Link to Post Post Reply Quote i am an idiot
I am pretty sure his interlock comes with a prewired socket for the starter kill relay. You will have to discard the socket and wire the relay as follows. 95 goes to the wire of the interlock that disables the starter. 85 connects to ignition. Cut the negative starter wire and connect one end of that to 30. The other cut wire connects to 87a

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer