Clifford Intellistart 1 Installation Manual Needed

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Clifford Intellistart 1 Installation Manual Needed

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stargaizer

Member - Posts: 9

Joined: May 06, 2010

Location: Illinois, United States

Posted: April 08, 2019 at 6:38 PM / IP Logged

Hi everyone,

I'm in need of an old school remote start add on module installation manual for the Clifford Intellistart 1, the first model. I attached a photo of the module below. If someone that has this please upload, I would greatly appreciate it.

Thanks,

Steve

Clifford Intellistart 1 Installation Manual Needed -- posted image.

Stargajzer

Back to Top

tonanzith

Gold - Posts: 593

This member consistently provides reliable information

Joined: July 18, 2008

Location: Washington, United States

Posted: April 13, 2019 at 10:05 PM / IP Logged

Should be this one. For some reason I couldn’t upload it here from my phone.

Clifford manual

Gary Sather

Back to Top

stargaizer

Member - Posts: 9

Joined: May 06, 2010

Location: Illinois, United States

Posted: April 13, 2019 at 11:13 PM / IP Logged

Hi Gary,

Yes, this is it. Thank you very much for uploading this installation manual, if there is anything I could do to help you in return please ask. I'll upload it to the installation manual section in case someone else may need it also.

Thank you,

Steve

Stargajzer

Back to Top

stargaizer

Member - Posts: 9

Joined: May 06, 2010

Location: Illinois, United States

Posted: May 04, 2019 at 10:42 PM / IP Logged

Hi Gary,

Would you happen to have the installation manual for the Clifford Intelliguard IQ 900 ? This is the alarm that I was looking to interface with the Intellistart module which you provided the installation manual for recently.

Thank you very much,

Steve

Stargajzer

Back to Top

tonanzith

Gold - Posts: 593

Joined: July 18, 2008

Location: Washington, United States

Posted: May 05, 2019 at 11:04 AM / IP Logged

Here you go.

Manual

Gary Sather

Back to Top

stargaizer

Member - Posts: 9

Joined: May 06, 2010

Location: Illinois, United States

Posted: May 06, 2019 at 11:53 AM / IP Logged

Thank you very much Gary!

Stargajzer

Back to Top

stargaizer

Member - Posts: 9

Joined: May 06, 2010

Location: Illinois, United States

Posted: August 03, 2019 at 12:06 AM / IP Logged

Hi Gary,

I was hoping that you would be kind enough to share your Clifford knowledge on something, I have a problem with my Intelligard 900IQ, I recently jump started another car a few weeks ago, since then every time I disarm the alarm and enter the car, the LED flashes the following sequence, 3, 4, 3, 1, 3, 3, 3, 3. Referencing the owner's manual these flashes indicate alarm triggers prior to the most recent disarming. I have a suspicion that I may have damaged one or more components on the alarm's printed circuit board, what are your thoughts?

Thanks!

-Steve

Stargajzer

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.