Viper V550 and XpressStart ONE 4x10/5x10 Installation Guide

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Viper V550 and XpressStart ONE 4x10/5x10 Installation Guide

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

packercool86

Member - Posts: 1

Joined: December 07, 2018

Location: Florida, United States

Posted: May 12, 2019 at 11:52 PM / IP Logged

I recently updated my alarm remote start system to the 5x10 by DEI/directed Electronics it works in conjunction with the m501 relay module. I have the system all wiring up and working successfully. I have a VSM-550 smart start module I need the correct information to what plug to use esp,esp2 or D2D. And weather the ground the white or gray and or to power the module separately with the two power wires or not in relation to witch combination is used. Thank you in advance for the help.

Bruce bruce p p jr

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.