2016 Scion iA Alarm/Remote Start Wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2016 Scion iA Alarm/Remote Start Wiring

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

muttnsnuff

Member - Posts: 3

Joined: July 18, 2019

Location: Texas, United States

Posted: July 18, 2019 at 6:21 PM / IP Logged

Looking for installation wiring diagrams to install remote start and alarm. Thank you

Back to Top

wirewise

Moderator - Posts: 489

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 07, 2002

Location: California, United States

Posted: July 18, 2019 at 6:38 PM / IP Logged

SCION IA

MODEL YEAR(S

IA 2016

KEY T-HARNESS IMMOBILIZER

N/A N/A VEHICLES WITH SMART KEY AND PUSH TO START REQUIRES A DBALL2 INTERFACE FOR REMOTE STARTING

PART COLOR LOCATION DIAGRAM

12 VOLT CONSTANT WHITE (+) camshaft position sensor, 4 pin plug, pin 1 or 2

STARTER GRAY (+) Start Stop Unit in steering column, white 24 pin plug, pin 23

STARTER 2 N/A

IGNITION 1 YELLOW (+) Start Stop Unit in steering column, white 24 pin plug, pin 10

IGNITION 2 N/A

IGNITION 3 N/A

ACCESSORY/HEATER BLOWER 1 PINK (+) Start Stop Unit in steering column, white 24 pin plug, pin 2

ACCESSORY/HEATER BLOWER 2 N/A

KEYSENSE N/A

PARKING LIGHTS ( - ) PINK (-) USE HAZARDS Start Stop Unit in steering column, white 32 pin plug, pin 4

PARKING LIGHTS ( + ) N/A

POWER LOCK PINK(-) THRU 1000 ohms (ONE WIRE SYSTEM) BCM above driver kick, white 32 pin plug, pin 6

POWER UNLOCK PINK (-) BCM above driver kick, white 32 pin plug, pin 6

LOCK MOTOR WIRE TAN (5-WIRE) ESU in driver kick, white 8 pin plug, pin 2

DOOR TRIGGER GREEN (-) BCM above driver kick, white 32 pin plug, pin 20

DOMELIGHT SUPERVISION RED (-) ESU in driver kick, white 18 pin plug, pin 16

TRUNK RELEASE GREEN (-) BCM above driv kick, white 24 pin plug, pin 11

SLIDING POWER DOOR N/A

HORN PINK (-) horn switch, white 14 pin plg, pin 1 or BCM, white 24 pin plug, pin 22

TACH BROWN (AC) camshaft position sensor, engine driver side, gray 3 pin plug, pin 1

WAIT TO START LIGHT N/A

BRAKE BLUE (+) Start Stop Unit in steering column, white 32 pin plug, pin 2

FACTORY ALARM DISARM BROWN (-) BCM above driver kick, white 32 pin plug, pin 22

ANTI-THEFT VEHICLES WITH SMART KEY AND PUSH TO START REQUIRES A DBALL2 INTERFACE FOR REMOTE STARTING

~wirewise~ Verify all wiring with your meter before making any connections!

Back to Top

muttnsnuff

Member - Posts: 3

Joined: July 18, 2019

Location: Texas, United States

Posted: July 18, 2019 at 6:44 PM / IP Logged

Would a bd3 bypass work?

Back to Top

muttnsnuff

Member - Posts: 3

Joined: July 18, 2019

Location: Texas, United States

Posted: July 18, 2019 at 7:34 PM / IP Logged

Need some picture instructions for installing remote start/alarm

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.