2016 Honda CR-V Backup Camera Video Wires

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2016 Honda CR-V Backup Camera Video Wires

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

toddwino

Member - Posts: 2

Joined: October 06, 2019

Location: New Jersey, United States

Posted: October 06, 2019 at 10:48 AM / IP Logged

I installed a Kenwood aftermarket stereo into my 2016 Honda CRV, and everything works great. EXCEPT - when I shift into reverse, there is no video feed into the Kenwood. The original video feed into the upper OEM camera is still there. When I shift into reverse, the Kenwood goes to the camera, but since there is no feed, it seems like I need to find the video feed wire, tap into it and connect it to an RCA jack. Then the RCA jack can go into the back of the Kenwood. Any help which wire(s) into the upper OEM unit (BIM?) unit are the video feeds? Thanks in advance

Toddwino in NJ

Back to Top

eguru

Copper - Posts: 340

Joined: February 04, 2018

Location: Quebec, Canada

Posted: October 06, 2019 at 3:02 PM / IP Logged

No idea, but look for a wire that has a shield around it. The shield will be connected to ground at the camera end (and also at the "display").

Back to Top

toddwino

Member - Posts: 2

Joined: October 06, 2019

Location: New Jersey, United States

Posted: October 08, 2019 at 1:42 PM / IP Logged

So I found the two leads off the MID connector - position 19(red wire) is video+ and position 3(white wire) is video-. Now the problem - The camera feed gives just a black screen, but it is getting a signal. Any suggestions?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.