2004 Nissan Maxima Alarm/Remote Start Wiring
Welcome Guest :)
vinjeni
Member -
Posts: 1
Joined: January 04, 2004
Location: United States
Posted: January 04, 2004 at 11:19 PM / IP Logged
I am looking for wiring info for the new model Maxima. I have been asssigned to install a remote start alarm on one and am hoping that someone will have done one and would kindly share this info with me. I am also looking for info for 2003 Nissan Altima. I have installed an alarm upgrade to factory keyless entry on one and customer is requesting auto lock/unlock function so my question on this car is where do I access the door lock wiring. Directed Electronics has a cool site except that you need to be a member to access their wiring info on newer cars. Used to have their password to access but they have changed it and we no longer do business with the company that used to supply our alarms. Appreciate any and all input to these. Vinjeni
Bnluis
Silver -
Posts: 578
Joined: December 24, 2002
Location: New York, United States
Posted: January 04, 2004 at 11:39 PM / IP Logged
Remote Starter Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Start: | | BLACK/ RED & BLACK / YELLOW | IGNITION SWITCH HARNESS ** |
Ignition #1: | | BLACK/ RED | IGNITION SWITCH HARNESS* |
Ignition #2: | | RED | IGNITION SWITCH HARNESS |
Ignition #3: | | N/A | |
Accessory: | | WHITE/ BLUE | IGNITION SWITCH HARNESS |
Brake Light: | | RED / GREEN | AT SWITCH ABOVE BRAKE PEDAL |
Tach Signal: | | | |
Parking Lights: | | RED / BLUE (+) | DRIVER'S KICK PANEL |
Headlights: | | BLUE & RED / YELLOW (+) | AT MODULE BEHIND PASSENGER HEADLIGHT |
OEM Alarm Disarm: | | WHITE/ BLUE (-) | AT KEY SWITCH INSIDE OF DRIVER'S DOOR *** |
OEM Alarm Arm: | | PINK/BLUE (-) | AT KEY SWITCH INSIDE OF DRIVER'S DOOR *** |
Diesel Glow Plug: | | N/A | |
Clutch Bypass Wire: | | | |
Notes: | | * This Vehicle Is Equipped With A Transponder Type Engine Immobilizer Theft System. Use Universal Alarm Bypass Module part # 2x402 where X can be any number. See Note #144 ** This Vehicle Is Equipped With Two Start Wires. Both Must Be Powered In Order For Vehicle To Start When Engine Is Cold. See Note #235 *** Test With A Meter While Turning A Key In The Driver's Door Lock Cylinder. |
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Constant +12 Volts: | | GREEN | IGNITION SWITCH HARNESS |
Starter Kill: | | BLACK/ RED & BLACK / YELLOW | IGNITION SWITCH HARNESS ** |
Ignition +12 Volts: | | BLACK/ RED | IGNITION SWITCH HARNESS* |
Dome Lights/Superv: | | COMES ON WITH UNLOCK | SEE NOTE**** |
OEM Horn: | | GREEN / WHITE (-) | STEERING COLUMN HARNESS |
Power Lock: | | PINK (-) | PIN # AT BCM NEAR FUSE BOX |
Power Unlock: | | BROWN (-) | PIN # AT BCM NEAR FUSE BOX ***** |
Trunk Release: | | RED / BLACK OR BLUE/RED (-) | PIN # AT BCM NEAR FUSE BOX |
Alarm Input Wire: | | COMES ON WITH UNLOCK | SEE NOTE**** |
Notes: | | **** Multiple Trigger Wires. Use Lt. Blue (-) For Driver's Door, Pink/Blue (-) For Passenger Front Door, RED / Black (-) For Both Rear Doors. All Wires Are Found At The BCM Located To The Right Of The Fuse Box. ***** Unlock Requires Double Pulse. See Note #231. Also See Note #201 Negative Trigger Door Locks. |
Remote Starter Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Start: | | BLACK/ RED & BLACK / YELLOW | IGNITION SWITCH HARNESS*, ** |
Ignition #1: | | RED | IGNITION SWITCH HARNESS |
Ignition #2: | | N/A | |
Ignition #3: | | N/A | |
Accessory: | | WHITE/ BLUE | IGNITION SWITCH HARNESS |
Brake Light: | | RED / GREEN ( + ) | Above Brake Pedal Switch |
Tach Signal: | | | |
Parking Lights: | | RED / BLUE ( + ) | FUSE BOX IN DR. KICK PANEL OR BCM |
Headlights: | | GREEN/ BLACK ( + ) | FUSE BOX IN DR. KICK PANEL OR BCM |
OEM Alarm Disarm: | | | |
OEM Alarm Arm: | | | |
Diesel Glow Plug: | | | |
Clutch Bypass Wire: | | | |
Notes: | | *This vehicle is equipped with a Transponder Anti-Theft Security System. Use Universal Alarm Bypass Module part #2x402 where X can be any number. The vehicle has a second starter (BLACK / YELLOW) wire that must be hooked up. See also Note #144 |
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Constant +12 Volts: | | GREEN ( + ) | Ignition Switch Harness |
Starter Kill: | | BLACK/ RED & BLACK / YELLOW | IGNITION SWITCH HARNESS*, ** |
Ignition +12 Volts: | | RED | IGNITION SWITCH HARNESS |
Dome Lights/Superv: | | RED ( + ) | AT BCM MODULE |
OEM Horn: | | | |
Power Lock: | | GREEN/ YELLOW ( + ) | AT BCM MODULE IN DRIVERS KICK PANEL |
Power Unlock: | | GRAY ( + ) | AT BCM MODULE IN DRIVERS KICK PANEL*** |
Trunk Release: | | RED ( + ) | AT BCM MODULE NEXT TO FUSE PANEL BEHIND LEFT SIDE OF DASH |
Alarm Input Wire: | | RED ( + ) | AT BCM MODULE |
Notes: | | ***See Note #202 Positive Trigger Door Locks |
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
Follow the12volt.com
Saturday, April 20, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
Topic Closed)
Members
Search
Register
Login
Printable version
