2000 Tundra Alarm Wiring
Home /
the12volt's Install Bay /
Vehicle Wiring Information & File Requests / 2000 Tundra Alarm Wiring (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: January 29, 2004 at 8:05 PM / IP Logged
Posted: January 30, 2004 at 11:03 AM / IP Logged
Try this:
POWER LOCK WHITE/ green - either kick panel
POWER UNLOCK red / YELLOW - either kick panel
FACTORY ALARM DISARM blue/black - drivers door harness
If you want to bypass the alarm permanently, see if there is a factory hood switch and see what signal it sends with the hood open. If it sends a ground then cut the wire and permanantly ground the wire. The system will never arm 'cause it'll think the hood is open!
Prepare your future. It wasn't the lack of stones that killed the stone age.
Prepare your future. It wasn't the lack of stones that killed the stone age.Posted: January 30, 2004 at 8:15 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
