Door locks for 98 Honda Accord

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Door locks for 98 Honda Accord (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Eliseo

Member - Posts: 14

Joined: September 23, 2002

Location: United States

Posted: September 23, 2002 at 5:39 PM / IP Logged

Can any one please help me. I have went thru the postings and seen the wiring diagrams for this car, but my problem is that when my alarm is armed, the doors lock then a bout 3-5 seconds later they pop back up. The alarm is a Fusion and it has on board relays could it be that not enough current is going thru? Right now I have tapped the door lock wires at the drivers kick panel and as soon as I do so the switch on the door for the locks quits working. Can anyone please help.

Late, E. Mendez

Back to Top

Eliseo

Member - Posts: 14

Joined: September 23, 2002

Location: United States

Posted: October 03, 2002 at 10:36 PM / IP Logged

If any body ever has this problem, I have found out that it was the on-board relays in the brain of the alarm. I Replaced the alarm with another and found the door locks to work perfect.

Late, E. Mendez

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Door locks for 98 Honda Accord

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.