2001 Toyota 4Runner Alarm/Remote Start Wiring

I need a remote starter wiring diagram for a 2001 toyota 4runner.

Constant 12 volts	WHITE/ RED & WHITE	IGNITION SWITCH HARNESS
Ignition 12 volts	BLACK/ RED	IGNITION SWITCH HARNESS
Starter	GREEN/ BLACK	IGNITION SWITCH HARNESS
Dome Light	L GREEN/ BLACK (-)	13 PIN CONN. BEHIND FUSE BOX *
Trunk Pin Switch	BLUE/WHITE (-)	AT SWITCH IN REAR DOOR
Parking Lamp	GREEN (+)	AT FUSE BOX IN DRIVER KICK PANEL
Power Lock	RED / WHITE	18 PIN CONN. IN DRIVER
Power Unlock	RED	KICK PANEL **

* Optional Door Trigger At Body ECU Located Behind Driver Dash In Fuse Block BLACK (Dr) (-), BLACK/ WHITE (Ps) (-) & BLACK/ RED (Rear Doors) (-). Diode Isolation Needed Cathode (Band Side) Of Diode Faces OEM Wires. ** Child Safety Locks: RED / BLUE (-) In 12 Pin BLUE Connector In Driver Kick Panel  Child Safety Locks

Accessories
Window Up	D\ L GREEN P\ RED / BLK D\ RED / BLU P\ YELLOW @ MAIN SWITCH
Window Down	F/ BLU/YEL F/ RED / GRN R/ RED / YEL R/ GREEN
Ign Key Warn	YELLOW/RED (-)	AT KEY CYLINDER SWITCH
Trunk Release	N/A
OEM Horn	GREEN/ RED (-)	STEERING COLUMN HARNESS
Headlights	RED (-)	AT HEADLIGHT SWITCH
OEM Alarm Arm	BROWN / WHITE (-)	18 PIN CONN IN DRIVER KICK PANEL
OEM Alarm Disarm	BLUE/BLACK (-)	18 PIN CONN IN DRIVER KICK PANEL

 Reversal Rest At Ground Power Window Circuit

Remote Start
Tach Signal	BLACK OR BLUE	AT ECM BEHIND PASSENGER SIDE DASH
Ignition #2	BLACK / YELLOW	IGNITION SWITCH HARNESS
Ignition #3	N/A
Accessory	BLUE/RED	IGNITION SWITCH AHRNESS
Neutral Safety	NOT GROUNDING TYPE -	OEM SWITCH OPENS STARTER CIRCUIT
Brake Light	GREEN / WHITE (+)	AT SWITCH ABOVE BRAKE PADEL
Reverse Light	WHITE/ BLUE (+)	AT SWITCH ON TRANSMISSION
Rear Window Defrost	L GREEN/ BLACK	AT SWITCH OR BODY ECU *

* Body ECU Located Behind Driver Dash In Fuse Block 

Immobilizer Bypass Circuit Omega Part:DB-PKT All Toyota/Lexis 98-02 (No Key Required).

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.