05 Denali instrument cluster no light

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 05 Denali instrument cluster no light (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Rangerover00

Member - Posts: 3

Joined: October 27, 2004

Location: United States

Posted: August 21, 2005 at 9:53 AM / IP Logged

I recently installed a sub in my 05 denali and after everything was put back together i noticed that my instrument cluster wasnt glowing. I took everything apart and checked for cut wires, then checked the fuse panel....nothing. Yes the wheel switch is on. If I slide it all the way up the dome lights come on as they should.

Where do I begin to look for the source of my problem now?

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 21, 2005 at 10:11 AM / IP Logged

Test all fuses with a DMM not with your eyes.
Did you remove the OEM radio or just used the high level/LOC for sub amp integration ?
Do you have the Bose system
What LOC did you use ?

Need some more information from you to help you out.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Rangerover00

Member - Posts: 3

Joined: October 27, 2004

Location: United States

Posted: August 21, 2005 at 10:55 AM / IP Logged

Still have to test the fuses, but I used a soundgate LOC(loc4 i believe), I do have the bose system with the original radio still in.

Back to Top

Rangerover00

Member - Posts: 3

Joined: October 27, 2004

Location: United States

Posted: August 21, 2005 at 12:29 PM / IP Logged

I tested the fuses and theyre fine. What would the loc or any stereo part have to do with the dash illumination. Id also like to add that everything else lights up as it should except for the gauges.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 21, 2005 at 12:57 PM / IP Logged

The only part of the stereo that connects with the dash lights from the stereo is the illumination & dimmer. You might have to bring in the truck to a GM dealer to get the scan tool on it to see if there's something wrong with the BCM.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

05 Denali instrument cluster no light

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.