1994 Mercedes 300E Alarm Correction - FYI

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 1994 Mercedes 300E Alarm Correction - FYI (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Theshadow27

Member - Posts: 38

Joined: April 21, 2005

Location: Virginia, United States

Posted: May 03, 2006 at 6:37 PM / IP Logged

Yesterday I used the diagrams from the data base to wire up a remote lock/unlock in a 1994 Mercedes 300E. All wires were dead on except the Lock/Unlock wire. It is specified as GREEN/ blue at vacuum pump. The correct wire is Yellow At the vacuum pump's 3 pin connector. This is (+) for unlock and (-) for lock. Just wanted to throw this out there for any mods out there to make this correction. Thanks for the great resource! JSD

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1994 Mercedes 300E Alarm Correction - FYI

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.