1990 ford probe lx wire diagram

I need a wire diagram to hook up a car alarm with remote start,and keyless entry,and i would also like to hook up my remote to open my trunk

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|blk/blu or black    |+  |steering column             ||          STARTER|blk/yel or blk/red  |+  |steering column             ||         IGNITION|blk/wht or blk/yel  |+  |steering column             ||  SECOND IGNITION|                    |   |                            ||        ACCESSORY|blk/red or blue     |+  |steering column             ||       POWER LOCK|GREEN/ black         |*1 |driver kick panel           ||     POWER UNLOCK|same wire           |   |                            || PARKING LIGHTS +|RED / black           |   |at dimmer switch            || PARKING LIGHTS -|RED / yellow          |   |at headlight switch         ||       HEADLIGHTS|WHITE/ yellow       |-  |at headlight switch         ||     DOOR TRIGGER|RED / WHITE/ sil dot  |-  |lower drivers kick          ||  TRUNK/HATCH PIN|red                 |-  |at rear light               ||         HOOD PIN|RED / white           |+  |sw or light under hood      ||       TACHOMETER|yellow/blue         |   |coil or diagn. plug         ||       BRAKE WIRE|WHITE/ green         |+  |brake pedal switch          ||     HORN TRIGGER|GREEN/ orange        |-  |steering column             ||           WIPERS|                    |   |                            ||  LF WINDOW UP/DN|RED / blu - grn/blu   |A  |in drivers door             ||  RF WINDOW UP/DN|grn/wht - RED / wht   |A  |in drivers door or dkp      |

Notes:

*1 Lock requires a positive trigger. Unlock requires a positive trigger through a 4,700 ohm resistor. Must use relays for both lock and unlock.

would it be possible for someone to post a step by step guide for a car alarm keyless entry ,remote start for a 1990 ford probe,i have the unit but not the cash to pay for a pro install any help would be appreciated