the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

wiring for a 2006 town and country


Post ReplyPost New Topic
< Prev Topic Next Topic >
stylyn 
Member - Posts: 3
Member spacespace
Joined: July 30, 2002
Location: Australia
Posted: February 26, 2007 at 3:43 AM / IP Logged  
Hi guys i am fitting an ecilpse AVN 6000 into a 2006/2007 Chyrsler Voyager (down here in Australia) Town and country to you guys. I am looking for any wiring info to allow me to turn on the factory amp which is in the right rear quater panel near the rear air con unit.I have a chrysler adaptor for use in fitting an aftermarket radio to a chrysler 300 and the like but it does not have the turn on wiring for the amp and i am now stuck and dont feel like wiring back to it.... Thanks for any help guys....
Installer_mss 
Copper - Posts: 221
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 14, 2005
Location: United States
Posted: February 27, 2007 at 10:39 AM / IP Logged  

have you tried without a turn on lead yet.  some factory amps dont have turn on leads...they have constant and ground and dont come on until it has audio input.

directwire says there isnt a turn on lead for the factory so just hook it up and try it...good luck

"If a man made it, another can modify it...it just takes some thinking."
"If you ask questions, you're a fool for 5 minutes; if you don't, you're a fool for a lifetime."

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer