94 infinity q45, power wire through firewal

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 94 infinity q45, power wire through firewal (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

blabla125

Member - Posts: 2

Joined: January 01, 2007

Posted: March 07, 2007 at 12:23 PM / IP Logged

Hello,

sorry if this is the wrong forum to post this...

I was wondering if anyone has ran a power wire through the firewall of a 1994 infinity Q45. I looked at the service manual and there appears to be a few places where wires go through the firewall but the gromet they go through seems to be too tight to fit anymore wires in.

Back to Top

h2oskierfl

Copper - Posts: 87

Joined: April 20, 2005

Location: United States

Posted: March 10, 2007 at 8:30 AM / IP Logged

you may need to make your own hole. If its an automatic, there may be a clutch plate that you can drill through. Otherwise, just find a spot that has clearance on both sides and drill there. Just be sure to double check everything before you start blasting holes and also be sure to use a grommet.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

94 infinity q45, power wire through firewal

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.