the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Please help convert to rca jacks


Post ReplyPost New Topic
< Prev Topic Next Topic >
sugarsnacks 
Member - Posts: 2
Member spacespace
Joined: February 10, 2003
Location: United States
Posted: February 11, 2003 at 9:30 AM / IP Logged  
I am installing a subwoofer amp in a 93 Nissan Altima and cannot seem to figure out the right way to use the line output converter.The car has two factory clarion amps ,the wiring is somewhat confusing .It seems to have shielded cables for the speakers . I have tried a couple different wires and have had little to no luck.can someone please tell me what wires to connect into? please help  ????
100% V8 fast&furious 4 bangers are for mommas boys
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: February 11, 2003 at 12:24 PM / IP Logged  
Go straight to the rear speakers for your speaker inputs for the LOC module.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
sugarsnacks 
Member - Posts: 2
Member spacespace
Joined: February 10, 2003
Location: United States
Posted: February 11, 2003 at 1:11 PM / IP Logged  

 loc module?  There are about 11 or 12 wires in the amp harness.

100% V8 fast&furious 4 bangers are for mommas boys
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: February 11, 2003 at 5:09 PM / IP Logged  
The LOC ( line out converter ) uses speaker inputs as your modules input signal. So, go straight to the back of the rear speakers for the two wires of each speaker & wire them into the LOC instead of fooling around with the Clarion amp harnesses.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer