2016 dodge ram 2500hd, nextrac tracking

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / 2016 dodge ram 2500hd, nextrac tracking

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

liljim63

Member - Posts: 1

Joined: October 26, 2016

Location: New York, United States

Posted: October 26, 2016 at 2:29 PM / IP Logged

I'm looking to install a nextrac tracking device. It's a 3 wire system. It has ground, 12v constant, and a True 12v ignition wire. I can't find a 12v ignition wire to tap into that doesn't drop below 10V at start up.

Back to Top

wisco_install91

Member - Posts: 5

Joined: November 25, 2016

Location: Wisconsin, United States

Posted: December 05, 2016 at 10:37 PM / IP Logged

You could use a relay. Connect pin 86 to your ignition wire, connect pin 85 to ground, connect pin 30 to your 12v constant wire and connect pin 87 to the 12v ignition input of your tracking device.

Tell me again about your 5,000 watt amp you got for $99.00

Back to Top

Search for other posts by wisco_install91

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.