2015 Toyota Prius C Hybrid, GPS Install, Remote Cutoff?

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / 2015 Toyota Prius C Hybrid, GPS Install, Remote Cutoff?

Welcome Guest :)

Members

< Prev Topic Next Topic >

kevin_1

Member - Posts: 9

Joined: August 25, 2021

Posted: August 25, 2021 at 7:01 PM / IP Logged

Gooday,

I'd like to know if anyone knows which circuit to tap into for the remote cut off feature in a GPS for hybrid vehicles. I'm planning on installing a GPS in a prius c and would like to know if anyone knows which circuit completely shuts of the car. Any help with this will be greatly appreciated.

mgoetz74

Silver - Posts: 424

This member consistently provides reliable information

Joined: February 15, 2012

Location: United States

Posted: August 26, 2021 at 9:30 AM / IP Logged

what year is the car?

33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

kevin_1

Member - Posts: 9

Joined: August 25, 2021

Posted: August 26, 2021 at 9:45 AM / IP Logged

2015

mgoetz74

Silver - Posts: 424

Joined: February 15, 2012

Location: United States

Posted: August 26, 2021 at 9:57 AM / IP Logged

h key

Ignition Pink + Ignition Switch, white 8 pin plug, pin 6

Second Ignition Lt. Blue + Ignition Switch, white 8 pin plug, pin 1

smart key

Ignition Pink + Junction Connector behind dash fuse box, white 22 pin plug, pin 4

Second Ignition Lt. Blue + Dash Fuse Box, rear, white 56 pin plug (3A), pin 29

33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

kevin_1

Member - Posts: 9

Joined: August 25, 2021

Posted: August 26, 2021 at 10:05 AM / IP Logged

Thanks..so its just the second ignition i'm tapping into to turn off the car remotely right.

kevin_1

Member - Posts: 9

Joined: August 25, 2021

Posted: August 26, 2021 at 10:23 AM / IP Logged

Thanks..so its just the second ignition i'm tapping into to turn off the car remotely right.

mgoetz74

Silver - Posts: 424

Joined: February 15, 2012

Location: United States

Posted: August 26, 2021 at 3:26 PM / IP Logged

usually you have to cut the wire in half so it cuts the power to it. One will be labeled as car side and one labeled key side on the gps tracker. I would do the main ignition but that just me and my ocd

33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

kevin_1

Member - Posts: 9

Joined: August 25, 2021

Posted: August 26, 2021 at 5:51 PM / IP Logged

so the main ignition will be the pink wire and i can just tap into that then. I'm using a gps relay type tracker so just the two wires for remote cut tapped across that should work then.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.