the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Installing AVIC-N2 and XDV-P90


Post ReplyPost New Topic
< Prev Topic Next Topic >
jtrevill 
Member - Posts: 20
Member spacespace
Joined: March 15, 2005
Location: United States
Posted: March 22, 2005 at 9:37 PM / IP Logged  

Hello all - yesterday I installed the AVIC-N2 into my Yukon.  Everything went smoothly so far.  I haven't tried any video applications yet, but music and Nav are working great.  However, I also have the XDV-P90 6 disc DVD Changer.  When looking through the install manuals, they don't describe how to hook up these two pieces, they only talk about these two when a TV Tuner is involved in the mix.  Anyone know how to install these two without the TV Tuner?

Thanks for any insight you can give!

12v_rep 
Copper - Posts: 188
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 28, 2004
Location: United States
Posted: March 22, 2005 at 10:19 PM / IP Logged  
The 90 runs to the brain. The plug is color coded and will only fit one way. Look at the plug and then look at the brain, you will see what I mean. It won't be too hard.
jtrevill 
Member - Posts: 20
Member spacespace
Joined: March 15, 2005
Location: United States
Posted: March 22, 2005 at 11:15 PM / IP Logged  
Thx for the reply - that was what I thought as well, but it isn't working right.  On the DVD Changer, there is an IP BUS IN and an IP BUS OUT.  I'm using the OUT, would you say this is correct?  In addition, on the brain, there is an IP BUS IN and another AV BUS as well...  I'm using the IP BUS IN.  Do I need to run any of the yellow video cables?  How about the red and white RCA?  Should it all run through the IP BUS cables?
Thanks for the help!
12v_rep 
Copper - Posts: 188
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 28, 2004
Location: United States
Posted: March 23, 2005 at 9:55 AM / IP Logged  
No need to run the A/V cables. If I am not mistaken you still need to buy the CD-AB300. It is the AV cable to link the changer to the brain. I believe you need that to control the changer. You will also need CD-R99 remote to be able to control it. I know this because I have the same thing, plus the TV Tuner, XM Tuner, 12 Disc Changer and soon adding the new Ipod interface. Lots of fun!!!!
jtrevill 
Member - Posts: 20
Member spacespace
Joined: March 15, 2005
Location: United States
Posted: March 29, 2005 at 9:07 PM / IP Logged  

Okay, so I got the CD-AB300 cable per Pioneer's recommendation as well. I've got the IP Bus cable hooked up between the brain and the changer and now the CD-AB300 cable hooked up between the brain and the changer as well.  However, I still don't get anything out of it.  The power does turn on using the remote, but not with the head unit.   I've tried switching the changer from IP BUS mode to Standalone mode, but no change.   When it's working properly, which icon should light up  on the source screen?   Any settings I'm missing here?

Thanks!

12v_rep 
Copper - Posts: 188
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 28, 2004
Location: United States
Posted: March 30, 2005 at 5:52 PM / IP Logged  
Mine is flush mounted, so I can't look at my changer. Is there a switch on there someplace, I can't remember. Also, you may need to go into the settings menu of you N1 and turn on one of the inputs. I will look at mine and see if you are missing anything and let you know. Keep up posted.
jtrevill 
Member - Posts: 20
Member spacespace
Joined: March 15, 2005
Location: United States
Posted: April 04, 2005 at 12:31 PM / IP Logged  

12v_rep - were you able to see anything on your unit?  I've called Pioneer (they were supposed to call me back and didn't last week), and I've also emailed them.  Once I hear back I'll post it for anyone else that may need it.

Thanks again!

12v_rep 
Copper - Posts: 188
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: April 28, 2004
Location: United States
Posted: April 04, 2005 at 3:27 PM / IP Logged  
There is nothing in the switching in the headunit that I seen. If you want to PM me a number to call you at I will see if I can walk you through it somehow.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer