Pioneer AVH-p5700DVD wiring?

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Pioneer AVH-p5700DVD wiring? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jdiablo

Member - Posts: 25

Joined: March 10, 2006

Posted: May 05, 2006 at 9:41 AM / IP Logged

I'm installing a Pioneer AVH-p5700DVD and I can't figure out where to hookup this wire,maybe because it was 12 at night or something,lol but I can use some help,and also for the orange(illumination) wire i have one on the schose wiring connector,but not on the one provided with the HU,should i just cut the one orange wire off my stock harness and connect it to the orange one on the schose?

violet/white:

Of the two lead wires connected to the back lamp,connect the one in which the voltage changes when the gear shift is in the REVERSE postion.

Where do i hook this wire up to?thanks

BTW its a 03 mountaineer

Back to Top

crcustoms45

Member - Posts: 29

Joined: February 15, 2006

Location: United States

Posted: May 07, 2006 at 6:22 PM / IP Logged

j diablo

illumination is pretty much a thing of the past with stereos. your unit has a light sensor anyway, it will dim with the sun. i would cut the wire off. altho, that wire is nice to add LED's to your interior if you like.

that violet/white wire is only to switch your screen to a backup camera when in reverse. unless you plan on putting one on, i would leave it there. do not cut it off completely, but cap it to avoid any problems.

if you plan on installing a backup camera, connect that wire to the switched side of the back up lights. you will need a test probe, or you could ask a "friendly" local shop to tell you the location and color of the wire.

if you cannot find a friendly shop, e mail me and i will look it up.

Chris

CR.Customs@hotmail.com

Chris

CRCustoms

Back to Top

jdiablo

Member - Posts: 25

Joined: March 10, 2006

Posted: May 07, 2006 at 9:08 PM / IP Logged

Thanks bro,i got it all setup,but you are saying that I can use that illumination light for LEDS?That is a good tip,thanks

Back to Top

kps67

Member - Posts: 25

Joined: December 15, 2004

Location: United States

Posted: May 08, 2006 at 11:04 AM / IP Logged

The orage wire on this unit is used to dim the display at night. You should connect it to a +12 Volts when your parking lights are on. It is the brown wire at the headlight switch.

Owner/Installer for Tricked Out Motor Works

Back to Top

crcustoms45

Member - Posts: 29

Joined: February 15, 2006

Location: United States

Posted: May 16, 2006 at 2:08 PM / IP Logged

ya, depening on the car that illum. wire will become (+) 12 volts which could power anything when you turn the parking lights on. possible relay ( you could use this to turn on under body lights or accents for night use) email me for further instruction

Chris

CRCustoms

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Pioneer AVH-p5700DVD wiring?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.