running power wire in ford focus
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100238
Printed Date: May 02, 2024 at 3:43 PM
Topic: running power wire in ford focus
Posted By: joescutlass
Subject: running power wire in ford focus
Date Posted: December 19, 2007 at 10:40 PM
where is a good place to come through the firewall in a 2000 ford focus se wagon .
i am running 4 awg power wire
-------------
if its too loud you must be too old
Replies:
Posted By: techman93
Date Posted: December 20, 2007 at 10:46 PM
I just did a 2006 Ford Focus and found a plastic plate to left of steering column on firewall. If the 2000 has one I am sure you probably could drill a hole and run 4 awg through a plastic grommet.
-------------
The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.
Do it right the first time... or I might have to fix it for ya
Posted By: gus1
Date Posted: January 06, 2008 at 8:14 PM
Look at the firewall to the left of the brake pedal (inside the car). You will see a knockout in the insulation, peel that out, and there is a plastic grommet you can drill through there. This is assuming an automatic transmission, as that is where the clutch pedal goes on the 5 spd cars.
-------------
Wherever I go, that is where I end up......
|