window nightmare, 94 chevy truck

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=100972
Printed Date: October 04, 2025 at 12:27 AM

Topic: window nightmare, 94 chevy truck

Posted By: fordOndubs
Subject: window nightmare, 94 chevy truck
Date Posted: January 09, 2008 at 3:10 PM

I have a 94 Chevy Fullsize truck and a friend told me he knew how to do windows up/down on it from the alarm. Well he tooke the window switch out of the drivers door and cut all the wires and pulled the wires off the switches and says he can't do it. Does anyone have a diagram showing what wires hook to each pin on the window switches on the drivers door or is there a way to just tap into the 2 wires that go to each motor to make them go up/down? I don't care about using a remote anymore just want them working again.

Thanks in advance

Replies:

Posted By: d_stever
Date Posted: January 21, 2008 at 5:24 PM

go down to most any auto part stores and find a CHILTON repair book, haynes books do not have the diagrams in them but the CHILTON do - good luck

Posted By: bellsracer
Date Posted: February 06, 2008 at 1:14 AM

Gotta love friends who "know" their stuff... If he really knew what he was doing he would have gotten a window control module...

I'll see what I can dig up for you, but first a question. Are the wires still coming out of the switch? Was the switch disassembled? Where did he cut the wires? Last, do you still have the switch itself?

-------------
Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.