Print Page | Close Window

holden wiring

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101534
Printed Date: April 29, 2024 at 5:30 PM


Topic: holden wiring

Posted By: ice32
Subject: holden wiring
Date Posted: January 24, 2008 at 9:00 PM

Hey guys,

I'm curious if anyone has access to a wiring guide for a vs commodore

or can confirm if the door trigger is negative or positive and the easiest place to tap into the door trigger wire is?

Any info would be great,

Thanks



Replies:

Posted By: stuntinonabusa
Date Posted: January 24, 2008 at 9:37 PM

use a DMM and test the door trigger...  if it is grounded with the door pin pushed in and 12v when released it is positive...  vice versa for a neg trigger....

you can grab the trigger wire from an interior underdash light if it comes on when the door opens(both driver and passenger).  if doing it that way, it would be a positive trigger. 



-------------
if at first u dont succeed........ lower ur standards



Posted By: ice32
Date Posted: January 25, 2008 at 12:22 AM
cheers



Posted By: mad550
Date Posted: January 25, 2008 at 4:20 AM
Doors are ground triggered and run to bcm which has a transistorised output for fading dome light best place is under steering wheel pull down access panel and use the main loom running up the right hand side, the door wire should be white, indicators light blue and dark blue etc.

-------------
WOW Sight and Sound
Maroochydore
Nothing is impossible!
Do it right the first time or don't do it at all.


Print Page | Close Window