pneumatic or electric sander?

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101767
Printed Date: May 29, 2024 at 7:41 AM

Topic: pneumatic or electric sander?

Posted By: latimere
Subject: pneumatic or electric sander?
Date Posted: February 01, 2008 at 9:10 AM

which sander is better? an electric sander or pneumatic sander. Orbital. will there be a huge difference.

Replies:

Posted By: KarTuneMan
Date Posted: February 06, 2008 at 9:48 AM

Which ever you can more easily use. If you have a nice shop, good compressor, air dryer, the whole nine. I would use air.

If not, well. Electric tools.... no maintinance.

-------------

Posted By: bbnick77
Date Posted: March 13, 2008 at 4:58 PM

What purpose are you using it for?

-------------
MECP Basic Installer Certified

Posted By: KPierson
Date Posted: March 13, 2008 at 6:21 PM

I too would agree it depends on your setup. Be aware that air sanders use a ton of air, so if you don't have a big compressor I wouldn't even consider a pnuematic.

I personally don't think you will see much difference in quality between the two of them.

-------------
Kevin Pierson

Posted By: evileagletalon
Date Posted: April 06, 2008 at 8:49 PM

I would just get an electric sander

Print Page | Close Window