Print Page | Close Window

induction heating for steam

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=101806
Printed Date: July 05, 2025 at 5:57 AM


Topic: induction heating for steam

Posted By: davidmark
Subject: induction heating for steam
Date Posted: February 02, 2008 at 2:54 PM

Hi,

I'm working on a project that would require the ability to heat water into steam via electric induction, preferably DC or via AC converter if necessary.

I'm thinking a monotube design with an induction coil surrounding it that could produce steam from 2 quarts of water in say 30 seconds or less.

Anyone here have experience with that kind of design?

Thanks,



Replies:

Posted By: alexandermark
Date Posted: February 04, 2008 at 6:35 AM
Definitely use a single tube. I would use one with vanes on the inside to maximize surface area between the water and the metal.

Get a copy of Davies & Simpson's Induction Heating Handbook through interlibrary-loan.

See also: Induction Heating



Posted By: KarTuneMan
Date Posted: March 04, 2008 at 8:55 AM
Contact hotwaterwizard.....

-------------


Print Page | Close Window