Illuminated Push Button Starter install

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10864
Printed Date: August 23, 2025 at 11:33 AM

Topic: Illuminated Push Button Starter install

Posted By: wraithdakrt
Subject: Illuminated Push Button Starter install
Date Posted: March 13, 2003 at 9:25 PM

Well I wired up the Button so that it lights up. The easy part I know. But I can't for the life me figure how to wire in the relay to the starter. This is in a 2000 Dodge Dakota. I'm not exactly the geniuses that you guys are. But, I don't like anyone else working on my truck but me. If anyone has a diagram or just an explanation would be great. Thanks for your Time!

Replies:

Posted By: Velocity Motors
Date Posted: March 14, 2003 at 5:38 AM

30: motor side of starter wire
87a: switch side of motor wire
85: ground
86 : one side of the contact on the push button itself ( the other contact will go to a 12 volt source switched )
87 : NOT USED

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: wraithdakrt
Date Posted: March 14, 2003 at 11:40 AM

Thanks Velocity. I got it working now. I had a serious Brain Fart on that one!

Posted By: Velocity Motors
Date Posted: March 14, 2003 at 4:30 PM

No problemo

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window