two way switch

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=111133
Printed Date: May 05, 2024 at 5:09 PM

Topic: two way switch

Posted By: porterda
Subject: two way switch
Date Posted: January 30, 2009 at 4:15 AM

does anyone have a wiring diagram that detail the best way to control a device eg light, water pump etc, from two switches, eg in car and engine bay. ideally i'd also like an indicator light at both switches that would illuminate whenever the device is on.

Replies:

Posted By: porterda
Date Posted: January 31, 2009 at 8:36 PM

Just in case anyone else needs to do something similiar, here is a basic example of a the solution. I was planning the use relays in the switching but will now use only one for the power.

https://www.rkm.com.au/ANIMATIONS/animation-three-way-switch.html

Posted By: porterda
Date Posted: January 31, 2009 at 8:41 PM

for some unknown reason the link as changing the address to

https://www.rkm.com.au/ANIMATIonS/animation-three-way-switch.html

change ANIMATIonS to ANIMATIONS and the address works fine.

Posted By: porterda
Date Posted: January 31, 2009 at 8:43 PM

should be

/ANIMATIONS/

in capitals

Posted By: howie ll
Date Posted: February 08, 2009 at 6:33 AM

Just wire up 2 switches to your relay, 1 in engine bay and one in car.

Print Page | Close Window