plexiglass?
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=11259
Printed Date: May 17, 2024 at 2:26 AM
Topic: plexiglass?
Posted By: magic2
Subject: plexiglass?
Date Posted: March 22, 2003 at 5:22 AM
Where do you guys purchase the stuff????1 would the big 2 have it???
Replies:
Posted By: iambakerboy
Date Posted: March 22, 2003 at 6:06 AM
Try Home Depot, they usally carry different thicknesses and sizes, and pricing is not too bad. It would be located near the window and door section.
Posted By: speedwayaudio1
Date Posted: March 22, 2003 at 11:58 PM
lexan is better you will find it at the speed shops. It cost more but it's a lot better to drill and work with. It will bend just like sheet metal. it does not chip and crack when you drill it.
-------------
Big Dave
Posted By: 2G Sport
Date Posted: March 25, 2003 at 7:42 AM
Better yet, check the yellow pages under plastics- I found one under Plastics- Rods, Tubes, Sheets, etc. that does any size, no minimum. Call a few places to see if they have lexan/plexi/etc. A lot of these places also carry colors/mirror types. Some shops require a minimum purchase so be sure to ask. Good luck!
Posted By: bberman1
Date Posted: March 25, 2003 at 8:26 AM
Like 2G Sport said the best place go get plexi is from Plastic manufactures etc. They have the best prices largest selection and the tools to do what ever you need done.
|