Print Page | Close Window

multiple turn-on leads

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1154
Printed Date: May 15, 2024 at 11:34 AM


Topic: multiple turn-on leads

Posted By: cyberbackpacker
Subject: multiple turn-on leads
Date Posted: June 06, 2002 at 1:42 PM

I am preparing to begin my install, but have a couple questions on my remote turn-on leads.  I am running three ppi amps, and an alumapro c.a.p. 5 which all require a remote turn on.  What is the easiest(although ideally best) way to do this?  I was thinking of running the turn on lead from the head unit to the alumapro, and then just running the three amps to a toggle switche(es).  Any suggestions?  Thanks.

-------------
-Kevin

cyberbackpacker



Replies:

Posted By: the12volt
Date Posted: June 06, 2002 at 2:11 PM

Hi cyberbackpacker, if you do not need to turn one or more on/off independently from the others, here's the simplest solution to turn them all on with the remote turn on lead of your head unit.

https://www.the12volt.com/request/request4.asp

the12volt


Print Page | Close Window