2010 ford transit
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116274
Printed Date: July 06, 2025 at 11:38 PM
Topic: 2010 ford transit
Posted By: cwhittington
Subject: 2010 ford transit
Date Posted: September 12, 2009 at 10:15 AM
Has anyone added power locks to this vehicle? If so, how did you do it?
-------------
curtis whittington
Replies:
Posted By: howie ll
Date Posted: September 13, 2009 at 9:11 AM
It's been out over here for about 4 years and I've never seen one without power locks. Having said that and without having removed a door trim panel I'm guessing cable drive. If you google Sempal or better still MES locks you will see cable specific kits for the doors plus sliding door lock kits. If you're asking about controlling the existing locks, go to the GEM module, it should be at the top of the l/h kick panel. RED / Black lock and GREEN/ Black unlock neg, also it's possible to deadlock and dual stage unlock, front doors only leaving the rear and side locked or separate rear/side unlock
|