tool to release wires in connector

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117217
Printed Date: May 06, 2024 at 5:44 PM

Topic: tool to release wires in connector

Posted By: swede
Subject: tool to release wires in connector
Date Posted: October 24, 2009 at 8:01 PM

I'm looking for a tool that releases the individual wires from inside a connector. Example: there is 4 wires inside a typical connector inside my dash...I want to remove 2 of the wires from the connector and replace them with a larger gauge wire.

I have seen guys use a paper clip to release the wires - many times fubaring up the connector. Is there an actual tool for this?

Thanks.

-------------
Subtlety is EVERYTHING.

Replies:

Posted By: Velocity Motors
Date Posted: October 24, 2009 at 9:41 PM

Try this for a MOLEX

Or this

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: swede
Date Posted: November 05, 2009 at 8:36 PM

Thanks very much. posted_image

-------------
Subtlety is EVERYTHING.

Print Page | Close Window