Amount of RAAMmat needed for Accord ?

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1178
Printed Date: October 24, 2025 at 1:17 AM

Topic: Amount of RAAMmat needed for Accord ?

Posted By: DutchBoy
Subject: Amount of RAAMmat needed for Accord ?
Date Posted: June 07, 2002 at 2:06 PM

I have a 94 Accord 4 door that I am looking to deaden the front doors of. How much RAAMmat do I need to complete this task? Someone said something about using the heavy weight RAAMmat for certain spots?

Hey Accord owners who have done this....anything special I should know before I start?

Replies:

Posted By: Velocity Motors
Date Posted: June 07, 2002 at 11:53 PM

You will need about 4 square feet per door and make sure you apply the deadning material on the back of the door panel as well as the door itself for the best possible results. Use a heat gun and make sure you are in a well ventilated area because when you start heating this stuff up...it really stinks !!

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window