noob, wiring into ignition, 1993 explorer

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117983
Printed Date: May 14, 2025 at 10:58 PM

Topic: noob, wiring into ignition, 1993 explorer

Posted By: swaintan
Subject: noob, wiring into ignition, 1993 explorer
Date Posted: November 24, 2009 at 3:36 PM

I have 1993 Ford Explorer XLT, bought a temp gauge, it says to wire it into the Cars Ignition because it is a Digital Gauge. How do I go about doing this? Never had to wire into ignition.

-------------
~*SwaintaN*~

Replies:

Posted By: ckeeler
Date Posted: November 24, 2009 at 4:14 PM

tie into the RED / green wire in the ignition wire harness. it should show 12v when the ignition switch is turned on. test to verify.

Print Page | Close Window