Another ? about multiple turn on leads
Printed From: the12volt.comForum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1181
Printed Date: July 15, 2025 at 12:36 PM
Topic: Another ? about multiple turn on leads
Posted By: cyberbackpacker
Subject: Another ? about multiple turn on leads
Date Posted: June 07, 2002 at 8:58 PM
I previously posted the following topic and received the following reply:
| I am preparing to begin my install, but have a couple questions on my remote turn-on leads. I am running three ppi amps, and an alumapro c.a.p. 5 which all require a remote turn on. What is the easiest(although ideally best) way to do this? I was thinking of running the turn on lead from the head unit to the alumapro, and then just running the three amps to a toggle switche(es). Any suggestions? Thanks. -Kevin cyberbackpacker |
the12volt wrote:
Hi cyberbackpacker, if you do not need to turn one or more on/off independently from the others, here's the simplest solution to turn them all on with the remote turn on lead of your head unit.
https://www.the12volt.com/request/request4.asp
the12volt
My question is this time, pardon my ignorance, is how do I go about obtaining an SPDT Relay, or making one. If I could be given so more guidance, it would be greatly appreciated. Thank you.
-------------
-Kevin
cyberbackpacker
Replies:
Posted By: bberman1
Date Posted: June 07, 2002 at 10:04 PM
Posted By: jloyd
Date Posted: June 07, 2002 at 10:10 PM