Print Page | Close Window

dismantling a com2000 peugeot/citreon

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125564
Printed Date: July 07, 2025 at 7:26 PM


Topic: dismantling a com2000 peugeot/citreon

Posted By: lee_hdi
Subject: dismantling a com2000 peugeot/citreon
Date Posted: January 09, 2011 at 7:42 AM

Hello people,
How do you take a Com2000 unit apart on Peugeot/Citreons? I can't see any screws or anything :/

I've got a spare one with the common dicky indicator, and was just going to have a go at fixing it before I throw it in the bin

Thanks,
Lee



Replies:

Posted By: howie ll
Date Posted: January 09, 2011 at 12:49 PM
What is a com 2000?

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.



Posted By: lee_hdi
Date Posted: January 09, 2011 at 4:13 PM
They are on Peugeot/Citreon cars that use multiplexing. The indicator stalk, wiper stalk, radio control stalk, airbag/horn spool are all in one unit.

The Com2000 'communicates' with the BSI (built-in system interface)

They look like this.....
posted_image



Posted By: howie ll
Date Posted: January 09, 2011 at 5:37 PM
It would have been nice to call it "Stalk assembly" then I would have given you the answer earlier....
No scrapyard job, take apart? It's a Peugeot! It will break!
BUILD QUALITY is a blasphemy to the French.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.



Posted By: lee_hdi
Date Posted: January 10, 2011 at 9:57 AM
But its called a Com2000, thats why I called it that posted_image

There must be some way to dismantle them as bba-reman repair them, thats why I asked if anyone knew how to.



Posted By: lee_hdi
Date Posted: January 12, 2011 at 9:24 AM
Sorted it. Didn't notice the clips on the top.

Cleaned all the connections and it seems to be working ok


Print Page | Close Window