Print Page | Close Window

fuse holder base material

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127969
Printed Date: May 18, 2025 at 9:01 PM


Topic: fuse holder base material

Posted By: welder
Subject: fuse holder base material
Date Posted: July 19, 2011 at 1:44 PM

hi

i am having trouble finding 2/0 fuse holders and don't really want to cut the wire down to  1/0 .

so going to build some for anl fuses and bolts for posts and i need to find out the type of plastic to use for the base.

 i will recess the bolts into the plastic . or is there a better material to use.

 has any one here ever made their own fuse holders. they will be placed out of sight in the trunk so they won't be seen..

any help would be great thanks

tim




Replies:

Posted By: violent b
Date Posted: July 25, 2011 at 7:38 AM

why not use an ANL fuse holder that uses ring terminals like this one from Install Bay:

posted_image


Print Page | Close Window