'90 300zx alarm install

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1291
Printed Date: July 29, 2025 at 11:33 AM

Topic: '90 300zx alarm install

Posted By: lrciii
Subject: '90 300zx alarm install
Date Posted: June 13, 2002 at 10:21 AM

I'm going to be installing a alarm system in my 300zx, adding remote door locks, raise the windows on arm & power rear hatch release. I'd like to keep the factory system intact as well, let it handle the starter disable etc. Is there an EZ way to disable the factory alarm when I hit the door unlock or hatch release button on the remote? Same idea, when the hatch is closed, automaticaly re-arm?

Thanks!

Lee

Replies:

Posted By: Big Dog
Date Posted: June 13, 2002 at 12:06 PM

Hey lrciii ,

In order to arm the factory alarm you have to send a negative pulse on the blue/red wire in the driver's kick or Anti-theft module which is located under carpet on passenger floor board. To disarm send a negative pulse on the gray/red wire in the driver's kick or Anti-theft module. posted_image

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: lrciii
Date Posted: June 16, 2002 at 1:49 PM

Thanks Big Dog!

Just the info I needed, should make this project much easier!

Thanks!
Lee
www.raising-cain.com

Posted By: caraudioshopbm
Date Posted: June 18, 2002 at 1:57 PM

WELL LEE THE STARTER KILL IS THE VERY LEAST OF YOUR TROUBLES HAVE YOU EVER TRIED TO ADD A ACT TO YOUR CAR ?? GOOD LUCK & MAY THE FORCE BE WITH YOU lol

Posted By: caraudioshopbm
Date Posted: June 18, 2002 at 1:59 PM

O YA FOOD FOR THOUGHT THA FACTORY ALARM IS VERY EASYLEY BYPASSED ALL SOME ONE HAS TO DO IS SCREWDRIVER IN LOCK & TURN HARD FACTORY ALARM DISARMED & NO STARTER KILL !!!!

Print Page | Close Window