2007 hyundai sante fe installer
Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131056
Printed Date: July 02, 2025 at 5:25 AM
Topic: 2007 hyundai sante fe installer
Posted By: scd2747
Subject: 2007 hyundai sante fe installer
Date Posted: March 27, 2012 at 8:09 PM
I just put a radio in a 2007 sante fe and made the rookie mistake of cycling the ignition with the airbag plug out.. What can I do to clear this code without taking it to the dealer?
Any help would be greatly appreciated
-------------
Where did all these left over screws come from?
Replies:
Posted By: sparkie
Date Posted: March 27, 2012 at 8:18 PM
You can try disconnecting the negative battery cable for 5 minutes and see if the code will clear/light goes out. Many airbag codes won't unfortunately. The only other thing that may help is to turn the ignition key on for 5 seconds and then turn it off for a couple of seconds. Do this enough times (maybe 40 or more) and the light may go out.
-------------
sparky
|