Print Page | Close Window

1996 yukon 4x4

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131421
Printed Date: May 02, 2025 at 1:30 AM


Topic: 1996 yukon 4x4

Posted By: hshark
Subject: 1996 yukon 4x4
Date Posted: May 16, 2012 at 7:56 PM

Hello everyone, so I need some help. I have a 1996 yukon, 4x4, leather interior, with the vortec 5.7 that comes with a factory fan clutch. I have had my a/c serviced and charged with 134 refrigerant. Now my problem is I am getting 40 degrees at the center vent but it takes some time to get to 40 degrees. I live in CA and have tempeatures currently in the 100+ degrees. I wanted to install an aux. condenser e-fan but have no idea how to get this done. I was wondering if anyone has done this before to a yukon. Maybe someone can provide a basic diagram so I can tackle this. I know some will say to eliminate the fan clutch and do e-fans, but I would like to retain my factory look and just add the condenser fan. I plan on using a dorman condenser fan that I read would work for my vehicle. Any help would be great... 

-------------
memphis car audio all around



Replies:

Posted By: itsyuk
Date Posted: May 17, 2012 at 3:36 PM
here is a GM diagram form a GM DVD serice disc for 96 yukons that had the aux cooling fan. find the parts and if you cant find the wires make them using this.posted_image

-------------
yuk
quiet rural missouri, near KC.
If your system moves you physically and not emotionally, you have wasted your money.


Print Page | Close Window