Print Page | Close Window

folding mirrors

Printed From: the12volt.com
Forum Name: General Discussion
Forum Discription: General Mobile Electronics Questions and Answers
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133728
Printed Date: May 03, 2025 at 4:42 AM


Topic: folding mirrors

Posted By: t&t tech
Subject: folding mirrors
Date Posted: February 28, 2013 at 10:13 AM

i already have a method to accomplish this but maybe someone can suggest another method. I wanna get my mirrors folding in when the ignition is turned off, and out when it's turned on.



Replies:

Posted By: howie ll
Date Posted: February 28, 2013 at 1:12 PM
What vehicle sunshine?
Two methods if standard wiring, think adding actuator in the Relay section.
Either use a pair of timed outputs from an alarm or a pair of 528ts from the ignition watch this space:-837_mirror_fold.bmp
Set the 528ts for 1 second longer than it normally takes them to fold and unfold.
PS Mitsubishi uses a different system, a POS (+) pulse on 1 wire to fold, then a POS (+) pulse on another to unfold hence what vehicle.

You knew Uncle Howard would come to the rescue didn't you.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.


Print Page | Close Window